India iVEDA Archives - rfxcel.com

India iVEDA Deadline Delayed for Track and Trace, Reporting

Our team in India just let us know that the iVEDA deadline for track and trace and reporting has been delayed. Here are the details.

As we wrote in early March, the Indian government had stipulated March 31 as the deadline for full track and trace and reporting to the Integrated Validation of Exports of Drugs from India and its Authentication (iVEDA) portal. The rules were to apply to both small-scale industry (SSI)- and non-SSI-manufactured drugs.

Today, however, the government extended the iVEDA deadline to August 1, 2023. The announcement was made through Public Notice 3/2023, which was signed by signed by Director General of Foreign Trade Santosh Kumar Sarangi.

As of today, the August deadline for barcoding the Top 300 domestic pharma brands is still valid. This requires eight data points to be incorporated into a bar code or QR code, including a unique product identification code (e.g., GTIN), the brand name, and manufacturing and expiry dates. The codes must be printed on or affixed to the primary packaging.

Final thoughts about the iVEDA deadline and requirements

We will of course continue to monitor these regulations and post news when necessary. Bookmark our blog and check back often to make sure you’re keeping up to date. And contact us today if you have any questions about this delay or compliance in any other country where you do you business.

For a good overview of India’s pharma regulations, read our update from September 2022. If we may say, our “Final thoughts” section in that article was prescient. We wrote that “India’s track and trace requirements are obviously evolving” and the pharma industry should “expect more changes as the deadlines for APIs [active pharmaceutical ingredients], iVEDA reporting, and barcoding get nearer.”

That post also cited some statistics from India’s Department of Pharmaceuticals’ 2020-21 Annual Report. Check those out and compare them with the highlights from the 2021-2022 Annual Report below. India remains one of largest and most important pharma markets in the world — and we can help ensure you stay compliant as its regulations evolve.

India pharma stats, 2021-2022

• India provides generic medicines to more than 200 countries.
• India is home to 8 of the world’s 20 largest manufacturers of generic medicines.
• More than 55 percent of its pharma exports to go to “highly regulated markets.”
• Ninety percent of World Health Organization (WHO) pre-qualified APIs are sourced from India.
• Sixty-five to 70 percent of the WHO’s vaccine requirements are sourced from India.
• As of August 2021, there were 741 U.S. FDA-compliant manufacturing sites in India.
• As of December 2020, Indian companies had secured nearly 4,400 abbreviated new drug application (ANDA) market authorizations.

 

India Track and Trace Regulations: March 31 Deadline for Exports & More

India iVEDA deadline extension link

This year will be a busy one for pharmaceutical compliance as governments around the world continue to roll out their serialization and traceability plans. India track and trace regulations are no exception: There was a deadline in January, there’s one at the end of this month, and another is coming in August.

Let’s take a look at the India track and trace regulations and what the pharma industry has to do to be ready.

January 1: Labeling APIs

As of January 1, 2023, all imported and domestically manufactured active pharmaceutical ingredients (APIs) must be labeled with QR codes “at each level packaging that store data or information.” This is the culmination of a process that began in June 2019, when the Drugs Technical Advisory Board (DTAB) approved a proposal mandating QR codes on APIs. At that time, DTAB estimated that the regulation would affect approximately 2,500 APIs.

The QR codes must contain 11 data points, including a unique product identification code, the name of the API, and the manufacturing and expiry dates. The QR codes must link to a national database with pricing data from the National Pharmaceutical Pricing Authority.

March 31: Full track and trace and reporting to the iVEDA Portal for exported drugs

For all exported drugs, March 31 is the deadline for full track and trace and reporting to the Integrated Validation of Exports of Drugs from India and its Authentication (iVEDA) portal. The rules apply to both small-scale industry (SSI)- and non-SSI-manufactured drugs. The iVEDA portal is used for only registering and reporting exported drugs.

August 1: Barcoding for the Top 300 domestic pharma brands

These rules were originally scheduled to come into force on May 1, but that was pushed back to August 1. The rules stipulate that eight data points must be incorporated into a “Bar Code or Quick Response Code” to be printed on or affixed to the primary packaging, including a unique product identification code (e.g., GTIN), the brand name, and manufacturing and expiry dates.

Final thoughts about the India track and trace regulations

We talked about these regulations in more detail last year. See that article here. As we said then, our team has worked in the India pharma market for many years and understands its complexities, challenges, and benefits. We have offices and experienced staff in the country. Contact us today to learn more about the India track and trace regulations and to arrange a demo. In about 15 minutes, one of our supply chain experts can show you how we can help ensure you comply while maximizing your impact in this huge market.

 

India Track and Trace Requirements Update: APIs, iVEDA, and Barcoding

It’s been a busy year with India track and trace requirements. The Ministry of Health has extended a deadline, announced a new deadline, and released new draft rules concerning key areas of the country’s pharmaceutical regulations.

There are deadlines coming up in the next 6 months, so let’s take a look at what’s happening with these India track and trace requirements..

India track and trace requirements for 2023

The upcoming India track and trace requirements affect three areas of manufacturing: labeling active pharmaceutical ingredients (APIs), reporting, and product labeling for the Top 300 brands. We’ll go in chronological order:

Labeling APIs: January 2023 deadline

Starting January 1, 2023, all imported and domestically manufactured APIs must be labeled with QR codes “at each level packaging that store data or information.” The government says this will help combat falsified drugs.

This is the culmination of a process that began in June 2019, when the Drugs Technical Advisory Board (DTAB) approved a proposal mandating QR codes on APIs. At that time, DTAB estimated that the regulation would affect approximately 2,500 APIs.

The QR codes must contain 11 data points:

      1. Unique product identification code
      2. Name of the API
      3. Brand name (if any)
      4. Name and address of the manufacturer
      5. Batch number
      6. Batch size
      7. Date of manufacturing
      8. Date of expiry or retesting
      9. Serial shipping container code
      10. Manufacturing license number or import license number
      11. Special storage conditions required (if any)

QR codes will also link to a national database with pricing data from the National Pharmaceutical Pricing Authority.

Companies are required to get a GS1 Company Prefix, a unique number that identifies a company as the owner a barcode and the product to which it’s affixed, and a GS1 Global Location Number. GS1 Global Trade Item Numbers will serve as the “unique identification code.”

Reporting to the iVEDA Portal: March 2023 deadline

On April 4, 2022, the Directorate General of Foreign Trade (DGFT) released a public notice that extended to March 31, 2023, the deadline for export reporting to the Integrated Validation of Exports of Drugs from India and its Authentication (iVEDA) portal. The change applies to both small-scale industry (SSI)- and non-SSI-manufactured drugs.

The deadline for this requirement has been postponed at least four times, starting in 2018, when India track and trace requirements centered around another reporting portal, the Drugs Authentication and Verification Application (DAVA). As we reported when iVEDA was launched, the deadline was changed from April 1, 2020, to October 1, 2020. It was changed again in April 2021 and, as we’re discussing now, in April 2022.

Draft regulations for barcoding pharma products: May 2023 deadline

On September 5, the Ministry of Health and Family Welfare published draft guidelines for barcoding the Top 300 brands in the country, all of which are named in “Schedule H2” of the announcement. The rules will come into force on May 1, 2023.

The goal of these India track and trace requirements — like so many other regulations around the world — is to combat counterfeiting, diversion, and unauthorized sales. The rules stipulate that eight data points must be incorporated into a “Bar Code or Quick Response Code” to be printed on or affixed to the primary packaging:

      • Unique product identification code (e.g., GTIN)
      • Proper and generic drug name
      • Brand name
      • Batch number
      • Expire date
      • Manufacturer name and address
      • Manufacture date
      • Manufacturing license number

If there is “inadequate space in primary package label,” the codes must be placed on the secondary packaging.

Industry observers have noted concerns with the guidelines, including:

      • QR codes may not be practical for data-dense pharmaceutical labeling.
      • The guidelines may not actually help fight counterfeits, diversion, and unauthorized sales.
      • In order for the eight mandated data points to be readable, labels would have to be unrealistically large — too big to fit on most packages.
      • It’s not clear if 2D DataMatrix codes would meet the requirements for a “Bar Code” in the guidelines.
      • GS1 standards are not required; in fact, they’re not mentioned at all.

To this last point, the initial response seems to point toward a call for GS1 standards: DataMatrix for barcoding, GTINs to identify products, use of two-digit Authentication Identifiers.

Final thoughts

India track and trace requirements are obviously evolving. Expect more changes as the deadlines for APIs, iVEDA reporting, and barcoding get nearer.

But one thing won’t change: India will continue to cultivate its position in the global pharmaceutical industry. Consider these statistics from its Department of Pharmaceuticals 2020-21 Annual Report:

      • The Indian pharmaceutical industry is the world’s third largest by volume and 14th largest in terms of value.
      • It has the second-most FDA-approved plants for generic drug manufacturing outside the United States.
      • It accounts for 60% of global vaccine production.
      • It is the world’s third-largest API market (8% share of global API industry, 500+ APIs manufactured in India, and it contributes 57% of APIs on the World Health Organization’s Prequalified List of APIs).

Our team has worked in the India pharma market for many years and understand its complexities, challenges, and benefits. We have offices and experienced staff in the country. And our signature Traceability System and Compliance Management solution have helped our customers keep up with India track and trace requirements and remain competitive.

Contact us today to lean more about the India track and trace requirements and to arrange a demo. In about 15 minutes, one of our supply chain experts can show you how we can maximize your impact in India.